The DL Series Installation Accessories for
Chromalox heat tracing products represents
the state of the art in heat tracing. Each model
in the series is designed to satisfy the demands
of a particular operation. These high quality
models combine a variety of functions
in a convenient, easy to use and economical
Connection of all Rapid Trace Heating Cables
to Customer Supplied Power Wiring in any of
the following applications:
- Hydrocarbon and Chemical
- Process Temperature
- Fluid Flow and Viscosity
- Freeze Protection.
- Molded of Durable Plastic Material
- High Service Temperature
- Corrosion Resistant
- Integrated Connection Accessories and
- Thermal Stability
- High Strength and Rigidity
- Stainless Steel Hardware to
Ensure the Integrity of the System
- Liquid Tight Design prevents
moisture from reaching the
electrical connections. All models
are rated NEMA 4X.
RTPC - Power Connection Kit
RTPC Power Connection Box is a NEMA 4X rated junction box designed to connect all Chromalox Rapid Trace Heating Cables to customer supplied power wiring. This kit provides waterproof cable entry for up to three cables, enclosure support, terminal block and a waterproof, corrosion resistant wiring enclosure with an opening to accept a 3/4" conduit hub (Chromalox CCH-2 or equal). A pipe strap (Chromalox PS or equal) is required to attach this model to a pipe.
RTST - Splice & Tee Kit
RTST Splice & Tee Box is a NEMA 4X rated junction box designed to make straight or tee splices for all Chromalox Rapid Trace Heating Cables. This model provides waterproof cable entry (for two cables for a splice or three cables for a tee), enclosure support, terminal block and a waterproof, corrosion resistant wiring enclosure. A pipe strap (Chromalox PS or equal) is required to attach this model to a pipe.
RTES - End Seal Kit
RTES End Seal Fitting is a NEMA 4X rated enclosure designed to terminate all Chromalox Rapid Trace Heating Cables. This model provides waterproof cable entry for one cable, enclosure support and a waterproof corrosion resistant enclosure. The fitting has two different curved mounting surfaces. One side has a 1-1/2" radius curved surface that provides stable support on pipes with a diameter of 3" or more. The other side has a 1/2" radius curved surface which permits a better fit on smaller pipes. In addition, this side also has four “feet” for installation on flat surfaces.