Freeze Protection Line Sensing Monitor Series

FPLS
Freeze Protection Line Sensing Monitor Series
  • Standard Nema 4 Enclosures
  • Nema 4X Stainless Steel Option
  • Hand/Off/Auto Selector Switch
  • 12, 18, 20, 30, and 42 Position Panelboards
  • 15, 25, 30, and 40 Amp Single-pole and Double-pole 30 mA Ground Fault Thermal-Magnetic Circuit Breakers
  • 100 and 225 Amp Main Bus
  • Single-phase 120/240 VAC
  • Three-phase 120/208 VAC 4-Wire
  • Three-phase 277 VAC 4-Wire
  • 100 and 250 Amp Main Disconnect Switch Option
  • Ambient and Line Sensing Control
  • WeatherTrace Sentinel Monitoring with Common Alarm and Re-Ring Feature (The re-ring feature allows the WeatherTrace panel to
    communicate additional alarm conditions in the system by momentarily clearing and resetting the alarm output contact. The customer's monitoring device such as a PLC or DCS would interpret this condition to alert the operators of an additional alarm occurring.)
  • Z-Purge Pressurization System for Class I, Division 2 Option
  • Enclosure Heater Option for Subzero Ambients
  • UL and cUL Third Party Approvals

FPLS – Freeze Protection Line Sensing Series

The FPLS series controls each heat trace line with individual Chromalox RTBC, RTBC-EP, E-100 or E121 pipe line sensing controls. Each circuit should be controlled by an individual sensor/controller. Depending on the application, controllers can switch more that one circuit.

Can't find what you're looking for?