Used to heat clean and corrosive solutions.
Ideal for side-arm heating, in-line circulation
and engine pre-heaters.
Unit is designed for a maximum operating pressure
of 100 psi at 200˚F
Terminal Enclosure — E1 General Purpose is
standard.
Elements — INCOLOY® sheath elements rated 75 W/In2.
Flange — Stainless steel flange for
corrosion resistance.
Vessel — CPVC pipe body material is resistant to many corrosive solutions and is ideal for water applications. Pipe body material
provides good thermal insulation, reducing
heat loss.
Thermostat — Integral thermostat with
60 to 200°F temperature range, located inside
the terminal enclosure.
High Limit Control — Integral automatic cutout
(over-temperature control) protects against fluid
or element overheat (set to open at 195°F).
Vibration Resistant — Vibration resistant
construction to withstand vibrations typically
experienced on many types of operating equipment
(i.e., engines).
Easy to Install — Minimal size and light weight,
no supporting brackets are required.