Circulation Heaters - Corrosive Solutions and High Temperature Gas

Circulation Heaters / Circulation Heaters - Corrosive Solutions and High Temperature Gas

Overview

Heat mildly corrosive solutions (pH5 to pH9) using stainless elements and a passivated stainless pipe body. Low watt density INCOLOY® sheath elements coupled with a passivated Stainless Steel pipe body provides long service life when heating highly corrosive solutions and sulfur laden oils. INCOLOY® elements and a Stainless Steel vessel enhance safe operation to nearly 1400°F outlet gas temperature in air, gas, or steam superheating applications. Fuel and Oil Heaters can be used in a variety of combustible solution applications.

Application Guidelines

  • Screw Plug or Flanged Heater Design
  • 3 – 14” Type 304 Stainless Steel Pipe Body, 150Lb Construction
  • 2 – 200 kW
  • 120, 240 and 480V, 1 & 3 Phase
  • General Purpose, Moisture Resistant/Explosion Resistant, Explosion Resistant or Moisture Resistant Terminal Enclosure
  • 0.475” Dia. Stainless Steel or INCOLOY Sheath Elements (15 – 50 W/In2)
  • With & Without Thermostat
  • UL, CSA and Other Third Party Approval, Listing or Certification Available on Many Models

Find Your Model

Parameters:

RESET FORM

Select a Model to Spec:

 Model Description
GCHCIS Small Capacity/Low Flow Gas Application
GCHIS High Temperature Gas Applications to 1200°F
GCHISB High Temperature Gas Applications to 1200°F
GCHISR High Temperature Gas Applications to 1200°F
NWHOIS Corrosive Oil & Highly Corrosive Solution Applications
NWHOISR Corrosive Oil & Highly Corrosive Solution Applications

6 Matching Items

Roll over results for more details

GCHCIS

  • Cartridge Heater Design
  • Stainless Steel Pipe Body
  • 0.5 - 3 kW
  • 120 and 240V,Single Phase
  • See Catalog Page PDF for more information

GCHIS

  • Screw Plug or Flanged Heater Design
  • 3 - 14" Type 304 Stainless Steel Pipe Body, 150 Lb Construction
  • 2 - 200kW
  • 120, 240 and 480V, 1 & 3 Phase
  • See Catalog Page PDF for more information

GCHISB

  • 3 - 18" ANSI Blind Flange Design
  • 3 - 18' Stainless Steel Pipe Body, 150 Lb Construction (750°F Max.Vessel and 1600°Max. Sheath Temp.) Internal Baffles.
  • 3 - 350 kW
  • 240 and 480V, 1 & 3 Phase
  • See Catalog Page PDF for more information

GCHISR

  • 3 - 18" ANSI Blind Flange Design
  • 3 - 18' Stainless Steel Pipe Body, 150 Lb Construction (750°F Max.Vessel and 1600°Max. Sheath Temp.)
  • 3 - 350 kW
  • See Catalog Page PDF for more information

NWHOIS

  • Screw Plug or Flanged Heater Design
  • 3 - 14" Type 304 Stainless Steel Pipe Body, 150 Lb Construction
  • 2 - 200 kW
  • 120, 240 and 480V, 1 & 3 Phase
  • See Catalog Page PDF for more information

NWHOISR

  • Screw Plug or Flanged Heater Design
  • 2 - 200 kW
  • 3 - 14" Type 304 Stainless Steel Pipe Body, 150 Lb Construction
  • See Catalog Page PDF for more information

Can't find the Circulation Heaters - Corrosive Solutions and High Temperature Ga you're looking for? Request a Quote