Metal Sheathed Radiant Heaters
Global Support
Support and spares available around the world.
Metal Sheathed Radiant Heaters
Chromalox offers multiple configurations of it's RAD series metal-sheath infrared radiant type heater. Each configuration offers a set of features designed to fit more specific application requirements. So if your application requires that wiring is done at one location, we have a hair pin design with both terminals located at one end of the enclosure. With our almost 100 years of experience, Chromalox understands that each application has a unique set of challenges. That's why we always try to anticipate those challenges and incorporate design elements that allow for optimal use.
RAD-H Hermetically sealed Single Element Radiant Heater
U-RAD-2 Double Hairpin Element Radiant Heater
Complete, Ready-to-Connect Assembly available in various lengths to accommodate work of varying dimensions.
Movable Mounting Clamps and Bolts are supplied to accommodate many mounting configurations such as banks, tunnels and oven sections.
Process Temperature Control — Radiant heater output may be controlled with Chromalox SCR Power Controllers, Percentage Timing Input Controls and Non-Contact Temperature Sensors.
Additional Sizes and Ratings
DU-RAD-2 Three Element Radiant Heater
Basic Unit is an extruded aluminum housing that contains one double hairpin-bent radiant heater in center, flanked by two U-shaped elements.
Movable Mounting Clamps and Bolts are supplied to accommodate many mounting configurations such as banks, tunnels and oven sections.
Terminals of end units are in end caps; center mounted terminals are enclosed in terminal box on rear of heater housing.
Process Temperature Control — Radiant heater output may be controlled with Chromalox SCR Power Controllers, Percentage Timing Input Controls and Non-Contact Temperature Sensors.
U-RAD-LT-2 Liquid-Tight, Double-Hairpin Element Radiant Heater
Complete, Ready-to-Install and connect assembly.
Movable Mounting Clamps and Bolts are supplied to accommodate many mounting configurations such as banks, tunnels and oven sections.
Process Temperature Control — Radiant heater output may be controlled with Chromalox SCR Power Controllers, Percentage Timing Input Controls and Non-Contact Temperature Sensors.
Power Connections are made at both ends, using high-temperature wire.
U-RAD-LT Liquid-Tight, Single-Hairpin
Complete, Ready-to-Connect Assembly available in various lengths to accommodate work of varying dimensions.
Movable Mounting Clamps and Bolts are supplied to accommodate many mounting configurations such as banks, tunnels and oven sections.
Special Protective Terminal Cover provides liquid-tight protection to terminals.
Power Connections are made at one end, using high-temperature wire.
RUTU Single Hairpin Element Radiant Heater Assembly
Broad Range of Sizes — Used alone or in combination RTU element assemblies offer same range of dimensions as type U-RAD.
Easy Assembly — Units are supplied with element support clips and support bolt and nut (requires drilled hole through reflector and housing) for changing U-RAD heating lengths and for replacing U-RAD elements. RUTU is also used by itself as a radiant heating device by many Chromalox customers.
RADD Two Element Radiant Heater
RAD Single Element Radiant Heater
U-RAD Single Hairpin Element Radiant Heater
S-RAD Single Element Radiant Heater
Complete, Ready-to-Connect Assembly available in various lengths to accommodate work of varying dimensions.
Movable Mounting Clamps and Bolts are supplied to accommodate many mounting configurations such as banks, tunnels and oven sections.
Process Temperature Control — Radiant heater output may be controlled with Chromalox SCR Controllers, Percentage Timing Input Controls and Non-Contact Temperature Sensors. See the Controls section of this catalog.
Additional Sizes and Ratings — Contact your Local Chromalox Sales office for price and availability.
Single Ended Wiring — Heaters may be furnished single-end wired with 18" leads as standard. Add the suffix SE to model number.
DU-RAD Single Element, Double-Hairpin Radiant Heater
More Heated Length for limited space.
Process Temperature Control — Radiant heater output may be controlled with Chromalox SCR Power Controllers, Percentage Timing Input Controls and Non-Contact Temperature Sensors. See the Controls section of this catalog.
For New or Existing Installations — Utilization of a double-hairpin element, with terminal connections in the center of the housing, gives a heated length covering almost the entire length of the housing.
Movable Mounting Clamps and Bolts are supplied to accommodate many mounting configurations such as banks, tunnels and oven sections.
Center Mounted Terminals are enclosed in terminal box on rear of heater housing.
Technical Resources
Process Radiant Heater Design Guide
Process Radiant Heater Accessories
Process Radiant Heaters Overview
RAD-H Hermetically sealed Single Element Radiant Heater
RAD-H Catalog Page
RAD-H Installation Manual
U-RAD-2 Double Hairpin Element Radiant Heater
U-RAD® Catalog Page
U-RAD Installation Manual
RUTU Single Hairpin Element Radiant Heater Assembly
U-RAD Single Hairpin Element Radiant Heater
U-RAD Catalog Page
U-RAD Installation Manual
S-RAD Single Element Radiant Heater
S-RAD Catalog Page
S-RAD Installation Manual
RADD Two Element Radiant Heater
RADD Catalog Page
RADD Installation Manual
RAD Single Element Radiant Heater
RAD Catalog Page
RAD Installation Manual
Converting Styles Instruction Manual
DU-RAD-2 Three Element Radiant Heater
DU-RAD Catalog Page
DU-RAD-2 Installation Manual
DU-RAD Single Element, Double-Hairpin Radiant Heater
DU-RAD Catalog Page
DU-RAD Installation Manual
U-RAD-LT-2 Liquid-Tight, Double-Hairpin Element Radiant Heater
U-RAD-LT-2 Catalog Page
U-RAD-LT-2 Installation Manual
U-RAD-LT Liquid-Tight, Single-Hairpin
Request a Quote
From high temperature gas heating to superheated steam and super-critical water processing, Chromalox is the leading partner for all process heating solutions.
