Cartridge and Immersion Temperature Controllers - 17000

17000
Cartridge and Immersion Temperature Controllers - 17000
  • Cartridge Immersion
  • Non-Indicating
  • -100 to +600°F Temperature Range
  • Slow Make & Break SPST
  • 0.1°F Accuracy
  • Not recommended for Pilot Duty Switching of Mechanical Contactor
  • UL Recognized

Cartridge type is designed for drilled hole cartridge heating installations in molding presse, platens, rubber vulcanizers, hot plates, etc.

  • Adjustable range from -100 to +600°F offers wide field of application.
  • Resolution sensitivity of 0.1°F offers close control of process.
  • Compact size. Lengths under 5” and diameters less than 13/16” fit almost any application.
  • Fast response as external metal shell expands or contracts with each temperature change.
  • Sheathing is brass for low range units; stainless steel for higher temperature use.
  • Couplings for hex head and coupling head types are brass with standard pipe threads for mounting. Hex head and coupling head immersion types are screwed directly through the threaded opening in tank or duct or directly into a pipeline containing gas or liquid. The coupling head unit may be directly attached to electrical conduit by means of standard male pipe threads.

WARNING: Hazard of Fire.

These controls function as temperature controls only. Because they do not fail-safe, an approved temperature and/or pressure safety control must be used for safe operation.

Select a Part
Part # Description  
227889 17123-0 NO -100 TO 600F Buy Now
227897 17121-0 NO -100 TO 400F Buy Now
227900 17023-0 NO -100 TO 600F Buy Now
227918 17021-0 NO -100 TO 400F Buy Now
265480 17000-0 NC -100 TO 400F Buy Now
265498 17002-0 NC -100 TO 600F Buy Now
265500 17050-0 NC -100 TO 400F Buy Now
265519 17052-0 NC -100 TO 600F Buy Now
265527 17100-0 NC -100 TO 400F Buy Now
265535 17102-0 NC -100 TO 600F Buy Now
265543 17150-0 NC -100 TO 400F Buy Now
265551 17152-0 NC -100 TO 600F Buy Now
Can't find what you're looking for?