Single Phase SCR Power Pak - MaxPac IP

MaxPac IP
Single Phase SCR Power Pak - MaxPac IP
  • 120-600 VAC @ 100-1200 Amp
  • Phase Angle Firing
  • Isolated Control Circuit Inputs:
       0-5mA, 0-20mA,
       0-50mA, 1-5mA,
       4-20mA, 10-50mA,
       0-5Vdc, 0-10Vdc
  • Flexible I/O Power Wiring
  • Built-In Power Distribution
  • Optional Current Limit
  • Easy Customer Interface
  • Remote Shutdown
  • Soft Start
  • Compact Size and Construction
  • Touch-Safe (option on 100 to 650 Amp models)
  • dv/dt Transient Voltage Protection
  • MOV Protection
  • Third-party certifications: cULus

  • Resistive Heaters
  • Electric Ovens
  • Furnaces
  • Kilns

Mechanical Features:

  • LED Indication of Firing
  • Customer Control Connections are made on a Plug-In Screw Type Terminal Block
  • Optional Remote Manual Adjust and Auto/Manual Switch
  • Heatsink Mounted Temperature Thermostat NC
  • Built-In Power Distribution
Electrical Features:
  • SCRs PIV 1200V Minimum on 480 V (1500 Volts on 600 Volt model)
  • Isolated Semiconductor Power Blocks are used on all Current Ratings up to 650 Amps
Safety Features

Personnel Safety:
  • Ground Potential Heat Sink up to 650 Amps
  • SCR to Heat Sink Isolation up to 650 Amps
  • Touch-Safe Option
  • UL 508 for units 650 Amps and under.
Equipment/Process Safety:
  • Input to Output Isolation
  • dv/dt Transient Voltage Protection
  • Optional I2t Fusing
  • Remote Shutdown
  • MOV
  • Current Limit
  • Soft Start
For more features refer to catalog page PDF under the Technical Resources tab.

The MaxPac Series is specifically designed for the OEM market. The current limit, soft start option, flexible I/O power wiring, space saving footprint, optional lug kits, I2t fusing, UL and cUL approvals make it an excellent candidate for your product.

The Chromalox Model MaxPac IP utilizes Phase Angle firing to modulate power to an inductive or resistive load. Phase Angle control has the advantage of proportioning every cycle thereby providing very fine resolution of power. Fast responding loads in which the resistance changes as a function of temperature are excellent candidates for Phase Angle control. The MaxPac Soft Start feature assures that the load power is gradually increased from zero to the value set by the command signal in the event of a power interruption. In addition, the Soft Start feature, optional Current Limit is used to protect the load, fuses, SCR controller, and the total system from large surge currents that could occur at startup. Chromalox MaxPac offers separate and adjustable Zero, Gain, Manual Bias, and Current Limit potentiometers for ease of calibration. Screw type plug-in connectors for input signals, remote shutdown, and optional Remote Manual Bias are standard for easy customer interface.

Can't find what you're looking for?