Single Phase SCR Power Pak - MiniMax 1P

MiniMax 1P
Single Phase SCR Power Pak - MiniMax 1P
  • 120-600 VAC @ 30-75 Amp
  • Phase Angle Firing
  • Isolated Control Circuit Inputs:
       0-5mA, 0-20mA,
       0-50mA, 1-5mA,
       4-20mA, 10-50mA,
       0-5Vdc, 0-10Vdc
  • Flexible I/O Power Wiring
  • Optional Current Limit
  • Easy Customer Interface
  • Remote Shutdown
  • Soft Start
  • Line Voltage Compensation
  • Compact Size and Construction
  • dv/dt Transient Voltage Protection
  • MOV Protection
  • Third-party certifications: UL Listed, cULus

The MiniMax Series is specifically designed for the OEM market. The plug-in options, flexible I/O power wiring, space saving footprint, I2t fusing and universal approvals make it an excellent candidate for your product.

The Chromalox Model MiniMax 1 Single Phase Solid State SCR Power Controller is a highly versatile power pak with optional plugin proportional Firing and Shorted SCR Detection Boards. Firing modes include: “ON/OFF Power Control” (Contactor) and “Proportional Power Control” (Zero Voltage Switching, DOT fire).

Chromalox’ exclusive DOT (Demand Oriented Transfer) firing switches the fewest number of cycles to provide the most precise zero crossover control. At 50% output the unit’s output alternates between one electrical cycle on and one cycle off. At 51% the output continues with one cycle on / one cycle off and gradually integrates one extra “on” cycle for the additional one percent. With the exception of phase angle firing, DOT firing is the most precise method of SCR control. DOT firing is preferred in many applications because phase angle firing creates unwanted RFI. DOT is excellent for applications where consistent heater/process temperature control is critical.

  • Resistive Heaters
  • Electric Ovens
  • Furnaces
  • Kilns

Mechanical Features:

  • LED Indication of Firing
  • Customer Control Connections are made on a Plug-In Screw Type Terminal Block
  • Optional Remote Manual Adjust and Auto/Manual Switch
  • Heatsink Mounted Temperature Thermostat NC
  • Built-In Power Distribution
Electrical Features:
  • SCRs PIV 1500V Minimum (1400 Volts on 600 Volt model)
  • Isolated Semiconductor Power Blocks are used on all Current Ratings
  • Optional I2t Fusing
Safety Features

Personnel Safety:
  • Ground Potential Heat Sink
  • SCR to Heat Sink Isolation
Equipment/Process Safety:
  • Input to Output Isolation
  • dv/dt Transient Voltage Protection
  • I2t Fusing for SCR Protection
  • Remote Shutdown
  • MOV
  • Current Limit
  • Soft Start
For more features refer to catalog page PDF under the Technical Resources tab.

Can't find what you're looking for?