The 1030 DIN Rail Over Temperature Controller is an ideal complement in both design and aesthetics to its cousin, the Chromalox 1020 Temperature/Process Controller. This fail-safe protection device may be used to shut down a process when the preset parameter threshold is realized. The controller cannot be reset until the process has returned to an acceptable parameter condition.
The 1030 is cost effective, easy to install, extremely fast to configure and comes equipped with the most desirable standard or optional advanced control features. The 1030 offers a bright OLED text / icon matrix display, 3 LED output/event indicators, 3 tactile input buttons and it occupies only 0.9" (22.5mm) of width on the DIN rail. Controller design choices include 2 or 3 outputs, Modbus RTU/RS485 digital communications and standard or low supply voltage choices.
- Food and Beverage
- Kilns and Ovens
- Fluid Baths
- Chillers and Cooling Towers
- Warming / Chilled Cabinets
- Heat Presses
- Plastic and Rubber Extrusion
- General Thermal Processes
And many more...
In many thermal control applications, it is
recommended, and often required, to employ
an over temperature or Limit Controller to
shut down the heater, or load, in the event that
the system is in a runaway condition. In both
design and aesthetics, Chromalox offers the
perfectly matching 1030 model Over Temperature
Controller that provides the necessary system
safety that your process requires. Please
see the 1030 pages in the Over Temperature
Controller section in this catalog.
Although competitively priced, the 1030 is not
short on thermal process control capability. The
advanced features that the 1030 offers, such
as a universal input, DC linear (analog) process
output, sensor break detection, Modbus
communications, digital input, and latching/
non-latching process, band, deviation and loop
alarms, are typically not available in control
units of this size or cost point.
|The ChromaTemp Configurator is an extremely intuitive programming tool which facilitates the cloning of multiple controllers and fast parameter file uploads and downloads to and from the controller and PC. Each main menu screen has all applicable parameters logically arranged for efficient setting confirmation or change. This configurator program features a six-step Setup Wizard which covers the most basic wiring, input type and programming requirements to assist the less experienced control users.
Current Release Version: 18.104.22.168
(Note: New configuration software releases occur without notice. If you need to update your release, you must first Uninstall your current version prior to installing the latest release. This may be done in Programs and Features which is located in the Windows Control Panel.