1/4 DIN Temperature Controller

2110
1/4 DIN Temperature Controller
  • Easy Three-Step Setup
  • High Current Output Option
      10 Amp Solid State Relay
      20 Amp Mechanical Relay
  • Plug-In Output Cards
  • J, K Thermocouple, or RTD Selectable Inputs, °F or °C Indication
  • Arm Relay Output Option
  • NEMA 4X Front Panel
  • Compact 1/4 DIN Design 4" Depth
  • Third-party certifications: cULus

The Chromalox 2110 Temperature controller offers simple setup, flexibility and control features in an attractive, compact design that both OEMs and users will find cost effective. The 2110 is housed in a rugged, plastic 1/4 DIN package that only requires four inches behind the mounting surface. Straightforward operation and easy to use control features are major strengths of the 2110 controller.

The optional Alarm Output gives you a non-latching, normally de-energized, 5 Amp relay output for over or under temperature protection of critical process temperatures.

Simple Sensor & Control Selection

Locate the input selection DIP switch on the bottom of the 2110 controller and simply select °F or °C. Thermocouple (TC) or RTD, the Thermocouple type (J or K), and PI (Proportional-Integral) or onof (on-off) control.

Easy Three-Step Setup: The 2110 delivers exceptional process temperature control. Your process is up and running after three easy setup steps: 1) Select the sensor and control type, 2) Hook up the system and 3) Select the desired temperature.

Full Feature Outputs: A total of six output functions further extend the applications flexibility of the 2110 controller:

  • 1 Amp Relay
  • 20 Amp Relay
  • Solid State Relay Drive
  • 1 Amp Solid State Relay
  • 5 Amp Solid State Relay
  • 10 Amp Solid State Relay

The 2110 features a variety of output cards including High Current options of a 10 Amp Solid State Relay or 20 Amp Mechanical Relay. These outputs can directly control many cartridge or strip heaters, eliminating the need for a remote contactor or solid state relay. For larger three-phase loads, the 2110 can drive a remote device with the Pilot Duty Relay or Solid State Relay Drive outputs.

The optional Alarm Output gives you a non-latching, normally de-energized, 5 Amp relay output for over or under temperature protection of critical process temperatures.

Packaging with the User in Mind: The 2110 features a NEMA 4X front panel with tactile feedback push buttons. The buttons allow even the heaviest gloved hand to easily configure this controller. Large, bright LED’s provide an easy-to-read interface at a distance.

Flexibility: Output cards are plug-in modules that are field replaceable. The switch-selectible control modes include On-Off or Proportional-Integral (PI).

For additional details and specifications, see the catalog page PDF in the Resources tab.

Select a Part
Part # Description  
317016 2110-R1000 1 Amp Relay Buy Now
317024 2110-R3000 20 Amp Relay Buy Now
317032 2110-V0000, SSR Drive Buy Now
317059 2110-S1000, 5 Amp SSR Buy Now
317067 2110-S2000, 10 Amp SSR Buy Now
317075 2110-R1100, 1 Amp Relay Alarm Buy Now
317083 2110-R3100, 20 Amp Relay Alarm Buy Now
317091 2110-V0100 SSR Drive Alarm Buy Now
317112 2110-S1100 5 Amp SSR Alarm Buy Now
317120 2110-S2100 10 Amp SSR Alarm Buy Now
Can't find what you're looking for?