Split Sheath Insertion Cartridge Heaters - XtremeDuty™

SST
Split Sheath Insertion Cartridge Heaters - XtremeDuty™
  • 3/8 - 1 Inch Diameter
  • 5 - 60 Inch Lengths
  • Sheath Temperatures up to 1600°F (871°C)

Chromalox cartridge heaters are most frequently used for heating metal parts by insertion into drilled holes. The SST Split Sheath industrial heater is designed especially for platen, die or mold commercial heating applications where the holes are poorly drilled or worn through age. Independent expansion of each section of the SST when energized, creates intimate contact with the wall of the hole.

  • Split Sheath design
  • Improved conductive heater
  • Easily inserted and removed from long holes
  • Incoloy® Sheath for long life at extreme temperatures
  • Compacted to maximum density for excellent element to sheath heat transfer and dielectric strength

  • Platens
  • Presses
  • Dies
  • Molds

Flexible Leads – SST & QST are available with flexible lead wires machine connected to the terminal pins, for temperatures to 850˚F(450˚C). 12” length is standard. Specify longer length.

Screw Terminals – SST and QST are available with standard 8/32 x 1” welded nickel plated steel studs. Easy terminal connections are made using lugs, leads or bus bar. Stainless steel, and other thread sizes or lengths are available. Consult Chromalox.

SST & QST Split Sheath Insertion Heaters Terminations

Can't find what you're looking for?