SRP Self-Regulating Heating Cable
(Process Temperature)

Process Temperature Maintenance to 230°F (110°C)

photo of a stripped hot water maintenance cable
Chart Icon svg image 48 height by 48 width
Energy Efficient

Optimized for efficiency gains across your processes.

Time Icon svg image 48 height by 48 width
Quick Install

Designed for faster installation to reduce your labor time.

Temperature Icon
Self-Regulating

Over temperature conditions are minimized.

About SRP Self-Regulating Heating Cable

Chromalox SRP self-regulating heating cable provides safe, reliable heat tracing for process maintenance applications to 230°F (110°C) or freeze protection of pipes / tank with high heat losses. Constructed of industrial grade 16 AWG buss wire with a tinned copper braid, SRP ensures operating integrity most hostile industrial environments.

WARNING — A ground fault protection device is required by NEC to minimize the danger of fire if the heating cable is damaged or improperly installed. A minimum trip level of 30mA is recommended to minimize nuisance tripping.

Request a Quote: Self-Regulating Heating Cable

Chromalox heat trace solutions offer a safe, reliable and efficient way for freeze protection and process maintenance of pipes, valves, and tanks in the most extreme conditions.

SRP Self-Regulating Heating Cable (Process Temperature)

+  Self-Regulating heat trace, Energy Efficient
+  16 AWG Buss Wire
+  Circuit Lengths to 750 Feet
+  Process Temperature Maintenance to 230°F (110°C)
+  Maximum Continuous Exposure Temperature, Power Off, 275°F (135°C)
+  Available in 5, 10, and 15 Watts per Foot
+  120 and 208-277 Volts Available from Stock
+  Industrial Process Maintenance Applications
+  Approximate Size .47 in. W x .20 in. H
+  Min. Bend Radius 1-1/8 "
+  For use on Metallic Pipes
+  Consult Factory for use on Plastic Piping
+  Factory Mutual (FM) approved for ordinary areas
+  FM, ATEX and IECEx approved for hazardous (classified) areas when used with U Series and DL accessories
+  Energy efficient, self-regulating SRP uses less energy when less heat is required
+  Easy to install, SRP can be cut to any length (up to max circuit length) in the field
+  SRP features lower installed cost than steam tracing, less maintenance expense and less down time
+  SRP can be single overlapped without burnout, which simplifies heat tracing of in-line process equipment such as valves, elbows and pumps
+  Because SRP is self-regulating, over-temperature conditions are minimized
+  Chromalox U-Series Connection Kits reduce installation time