The CFW Advance Modular SCR Power Controller offers single phase, three phase 2-Leg, or three phase 3-Leg power control from 40A to 600A. All models feature Zero Cross and Phase Angle firing capability making the CFW extremely versatile in the industry. Multiple input options are featured, including 0-5V, 0-10V, 0-20mA, 4-20mA, PWM, and 1Kohm to 10Kohm potentiometer signal. Programmable analog outputs are included to allow retransmission of critical process details.
Modbus RTU/RS485 communications are outfitted by default, but with PLC’s and integrated networks being commonplace, the CFW can host
a number of additional fieldbus communications including Modbus TCP, Profibus, ProfiNet, Ethernet IP, DeviceNet, EtherCat, and CANopen. Each of these fieldbus cards can be installed at time of order or outfitted at a later date. This makes it extremely easy to adapt the CFW to any host network.
Complete Process Control Package
In addition to the integration of PID control and power control, the CFW offers a full suite of diagnostic and monitoring capabilities to make this the most versatile controller Chromalox has to offer. Full thermal and electrical monitoring allows
users to anticipate failures and malfunctions so corrective steps can be taken in a timely manner.
With each zone outfitted with an independent current transformer, full diagnostics can be performed from loop break alarm, heater break, SSR short circuit, input opening or short circuit, and even over temperature alarm.
- Injection molding
- Heat treatment
- Mold & dye heating/cooling
- Chemical Processing
- Textile production
- Multizone Furnaces
- Industrial Ovens
The C-PWR Configuration Software permits efficient programming of the following Chromalox SCR power controllers: CTF, CTF-Xtra, C4, C4-IR, CFW, and CFW-Xtra. It will facilitate the cloning of multiple controllers and fast parameter file uploads and downloads to and from the controller and PC.
Parameter value settings may be entered via the master table or through the Setup Wizard which methodically walks you through the main screens. Use the C-PWR Configuration Software Manual for program installation and connection details. To program your specific SCR controller, use the appropriate controller programming manual.
Current Release Version: 1.3.0
(Note: New configuration software releases occur without notice. If you need to update your release, you must first uninstall your current version prior to installing the latest release. This may be done in Programs and Features located in the Windows Control Panel.)
C-PWR Configuration Program Setup