The Chromalox 50 Series Limit Controllers
provide you with a comprehensive feature list
and the flexibility to meet your most demanding
process needs. This series is affordable,
easy-to-use and adaptable to simplify all
aspects of limit control.
This fail-safe protection device may be used
to prevent damage to equipment or products.
It will shut down a process when the preset
parameter threshold is realized. The controller
cannot be reset until the process has returned
to an acceptable parameter condition.
The 50 Series Limit Controller maintains the
maximum (High Limit Action) or minimum
(Low Limit Action) process variable value
since the last reset occurred. Additionally the
controller records the accumulated time for
which the limit has been exceeded since this
parameter was last reset.
The 50 Series Limit Controllers are an ideal
complement in both design and esthetics to its
cousin, the Chromalox 40 Series Temperature/
Process Controllers.
- User-friendly functionality
- High/Low Limit Alarm
- Universal Input
- Digital Inputs
- Intuitive ChromaWareTM Configuration Software
- Easy to use HMI
- Jumperless and auto-hardware detection
- configurations
- 24 VDC transmitter power supply
- Dual, red over green, 7 segment LED
- 10 VDC SSR Drive Output
- 4 digit upper and lower displays
- MODBUS communication
- Plug-in output modules
- Process Alarms
- Outputs 2 and 3 are user-selectable and
- customizable for each application
- Output Options: Relay, SSR Driver, DC linear, Triac, 24 VDC transmitter power supply, Retransmit PV or Limit Trip Setpoint
- Remote reset for digital input option
The Chromalox ChromaWare Configuration Software for the 40 & 50 Series DIN controllers is an intuitive programming tool which facilitates quick controller setup and fast recipe file uploads and downloads to and from the controller and PC. ChromaWare offers a Configuration Wizard to assist the less experienced users and an Expert View for those who have an elevated level of programming knowledge.
ChromaWare facilitates the configuration of the following Chromalox DIN Controllers:
- 40 Series Temperature Controllers - 6040, 8040, 4040 (Including Valve Motor Drive & Heater Break Alarm Versions)
- 50 Series Overtemperature (Limit) Controllers - 6050, 4050
Current Release Version: 4.12 (Version 4.0, Revision 12)
(Note: New configuration software releases occur without notice. If you need to update your release, you must first uninstall your current version prior to installing the latest release. This may be done in Programs and Features which is located in the Windows Control Panel.)
Download ChromaWare Setup file (4.12) (zip)
|

|