Chromalox HSRL self-regulating heating cable provides safe, reliable heat tracing for freeze protection of pipes, valves, tanks and similar applications. Constructed of industrial grade 16 AWG buss wire with a tinned copper braid and fluoropolymer overjacket, HSRL ensures operating integrity in Div. 1 hazardous environments. HSRL heating cable has a maximum maintenance temperature rating of 150°F (65°C) and a maximum exposure temperature of 185°F (85°C)
Note: Due to the nature of Division 1 hazardous location applications consultation with a factory representative is required.
WARNING — A ground fault protection device
is required by NEC to minimize the danger of
fire if the heating cable is damaged or improperly
installed. A minimum trip level of 30 mA is
recommended to minimize nuisance tripping.
- Energy efficient, self-regulating HSRL uses
less energy when less heat is required.
- Easy to install, HSRL can be cut to any
length (up to max circuit length) in the field.
- HSRL features lower installed cost than
steam tracing, less maintenance expense
and less down time.
- HSRL can be overlapped without burnout,
which simplifies heat tracing of in-line process
equipment such as valves, elbows and
pumps.
- Chromalox HL Connection Kits reduce installation
time.
Approvals
FM Approved
- Class I, Division 1, Groups B, C, D
- Class II, Division 1, Groups E, F, G
- Class III, Division 1
- 3 Watt rated T6 temperature class
- 5 and 8 Watt rated T5 temperature class
- 10 Watt rated T4A temperature class
CSA Approved
- Class I, Division 1, Groups B, C, D
- Class II, Division 1, Groups E, F, G
- 3 Watt rated T6 temperature class
- 5 and 8 Watt rated T5 temperature class
- 10 Watt rated T4A temperature class