High Pressure Steam/Air/Gas and Corrosive Solution Applications
IEC/CE Certification

High Pressure Steam/Air/Gas and Corrosive Solution Applications
IEC/CE Certification
  • Heat Gas or Fluids to 3500 psi (241 bar) or 7500 psi (517 bar)
  • 3 - 30 kW
  • 120 - 690 V, 1 & 3 Phase
  • Moisture or Explosion Resistant Terminal Housing
  • ATEX Certified (Zone 2)
  • ASME Section VIII and PED Pressure Code Rated
  • 3/4 in. or 1 in. 316 Stainless Steel Process Piping
  • INCOLOY 800 or 316 Stainless Steel Heating Elements
  • (1) Type J Thermocouple Process Sensor
    (2) Type J Thermocouple Overtemperature Sensors
  • 316 Stainless Steel Thermowells for Sensors
  • Marine Grade Aluminum Casting
  • Butt-Weld Connections
  • 316 Stainless Steel Vertical or Horizontal Mounting Plate

Chromalox CCX - Cast Circulation Heat Exchanger - is designed to operate at up to 3500 psi (241 bar) at 392˚F (200˚C), with an available option for up to 7500 psi (517 bar).

The moisture resistant enclosure is designed to accept NPT, metric, and / or gland plate connections. An optional explosion proof terminal housing is available for hazardous area installations and is certified by both ATEX and IECex.

The aluminum casting ensures even heat transfer throughout the process piping, while limiting temperature input. The rugged design, certified by ASME and PED, ensures safe, reliable operation for many years.

The CCX heater is engineered to heat high-pressure natural gas to control moisture content for turbine seals. Due to the robust design, the CCX design is also suited for many high-pressure applications involving, air, nitrogen, CO2, and other industrial gases. Seamless piping with corrosion resistant material also make it suitable for liquid applications. The casting allows definitive temperature control as the point of heat transfer to the process stream. This also makes the CCX an effective heat exchanger for temperature sensitive heating applications.

Chromalox CCX heaters are suited for a variety of industrial process applications, including:

  • Seal gas heating / condensation prevention for turbines
  • Fuel-oil preheating
  • Steam superheating
  • Corrosive / acidic solutions
  • De-ionized water
  • Oil warming
  • Water pre-heat
  • Natural gas
  • Air, CO2, and nitrogen heating

Standard Features Benefits
Seamless, 316 Stainless Steel Piping Corrosion Resistant, ASME/PED rated 3500 psi (241 bar)
Moisture Resistant Terminal Enclosure CE & ATEX rated Rated for IEC Zone 2, safe area
Multiple Sensors Provides both process and overtemperature monitoring
Marine Grade Aluminum Casting External corrosion resistance for harsh environments
Butt-Weld Connections Welded, sealed connections minimize potential leakage
Heavy-Wall INCOLOY 800 Elements High-temperature, corrosion resistant offering
Compact Footprint Space saving design
Floor Mounting Plate Pre-drilled mounting plate for easy installation
Integrated Heat Distribution Stringent temperature control of film interface

Can't find what you're looking for?