Process Radiant Heaters
- Metal Sheath, Medium Intensity & Medium Wavelength
- Quartz, High Intensity & Short Wavelength
- Quartz, Medium Intensity & Medium Wavelength
- Radiant Oven Assemblies
- Wide Area Quartz Panels
- Ceramic Panels
Selection Guidelines
The metal-sheath type heater is easily installed and may be operated in any position.
The units may be mounted to form banks, tunnels or oven sections. Chromalox offers
heaters in two standard intensities. 1.83 kW per sq. ft. — type RAD. Adequate
intensity for about 80% of all applications including finish curing.
3.66 kW per sq. ft. — type RADD, U-RAD and U-RAD-LT speed up webfed and conveyorized
operations in which excessive temperatures will not cause damage. Examples are water
dry-off, shrink fitting and weld preheating.
Liquid-tight housings are available for single and double hairpin designs where
moisture resistance is desired.
Quartz lamp and Quartz tube have faster heat and cool down cycles for higher speed
process applications.
Wide area panels can give a wide, flat infrared radiation pattern where needed.
See the following selection guidelines to find more product information.
Process Radiant Heaters — Selection Guidelines
|
RAD Series LN & LW Series
|
Mounting Methods Mounting Methods
|
|
|
E-27
E-28
|
Metal Sheath/
Medium Wavelength/
Medium Intensity
|
Single Element - 1.83 kW/Ft2
Double Element - 3.66 kW/Ft2
Single Element - Single End
Single Element - Hermetically Sealed
Single Hairpin Element
Double Hairpin Element
Single Hairpin Assembly
Liquid-Tight, Single Hairpin
Liquid-Tight, Double Hairpin
Single Element, Double Hairpin
Three Element
Panel
|
0.4 - 4.5
1.6 - 13
0.9 - 4.4
0.7 - 3.6
0.8 - 3.6
1.6 - 7.2
0.8 - 3.6
0.8 - 3.6
1.6 - 7.2
1.6 - 7.8
3.2 - 15.0
13.2 - 36.0
|
RAD
RADD
S-RAD
RAD-H
U-RAD®
U-RAD®
RUTU
U-RAD-LT
U-RAD-LT
DU-RAD
DU-RAD
U-RP
|
E-29
E-31
E-33
E-35
E-36
E-38
E-40
E-41
E-42
E-44
E-45
E-49
|
Quartz/
Short Wavelength/
High Intensity
|
Quartz Lamp
|
0.5 - 3.8
|
QR
|
E-51
|
Quartz/
Medium Wavelength
|
Quartz Tube
|
0.35 - 4.3
|
QRT
|
E-52
|
Accessories
|
Grilles, Reflectors, Terminals
|
|
|
E-53
|
Specialty
|
Lamp Replacement - METARAY®
|
0.37 - 1.0
|
FR & DQ
|
E-54
|
Assemblies
|
Oven Sections
|
0.45 - 3.8
|
LN & LW
|
E-55
|
Elements
|
Quartz Lamp
T-3 Quartz Tube
|
0.5 - 3.8
0.38 - 4.3
|
|
E-57
E-58
|
Wide Area
|
CP Series
Quartz - High Intensity
|
1.8 - 4.8
|
CPHI
|
E-59
E-61
|
Ceramic
|
Curved Face
Flat Face
Accessories
|
0.2 - 1.2
0.2 - 1.0
|
RCH-C RCH-F
|
E-63
E-64
E-65
|
Download the Process Radiant Heaters Selection Guidelines