CPWS, CPWM, CPWSS, CPWQ & CCF Protective Wells & Compression Fittings [Technical Overview]
Specification for CPWS, CPWM, CPWSS, CPWQ and CCF protective wells and compression fittings. Protective wells are used to enclose and protect the sensing device from some physical damage and corrosive liquids. Compression fittings are used for sealing the aperture required for the sensor to penetrate the wall of pipe, tank or duct.
Media Library
TMO Medium Weight Oil Applications [Technical Overview]
Specification for TMO Medium Weight Oil Applications. Flanged immersion heaters are one of the most widely used methods for commercial heating of gases and liquids, such as water, oil, heat transfer fluid, and corrosive solutions. Designed for use in tanks and pressurized vessels, they are easy to install and maintain to provide heat for many processes. The direct immersion method is energy efficient and easily monitored and controlled. Flanged immersion heaters are used in a wide variety of applications, such as hot water storage tanks, warming equipment, preheating oil, food processing equipment, cleaning and rinsing tanks, heat transfer systems, process air equipment, boiler equipment, and freeze protection.
Media Library
Legacy - CFW Advanced Modular SCR Power Controller [Technical Overview]
Specification for CFW advanced modular SCR power controller. The CFW series advanced SCR power controller offers modular single phase, three phase 2-Leg, or three phase 3-Leg power control from 40A to 600A. All models feature Zero Cross and Phase Angle firing capability making the CFW extremely versatile in the industry. Multiple input options are featured, including 0-5V, 0-10V, 0-20mA, 4-20mA, PWM, and 1Kohm to 10Kohm potentiometer signal. Programmable analog outputs are included to allow retransmission of critical process details.
Media Library
CTS Series [Technical Overview]
Specification for CTS Series. The CET-GF electronic thermostat with ground fault is a temperature control and power connection kit. It is used for freeze protection or process temperature maintenance of pipes or tanks protected by heat tracing products. This thermostat can be used with CPR, CPM or CZH heating cables in Ordinary area locations.
Media Library
LEGACY - BLCK-MH & BLCS Deep Tank Blade Heaters [Technical Overview]
LEGACY - Specification for BLCK-MH & BLCS deep tank blade heaters. Over-the-side immersion heaters are designed for installation in the top of the tank with the heated portion directly immersed along the side or at the bottom. This provides easy removal of the heater and ample working space inside the tank. They take up little space, eliminate the need for tank penetrations, are easily removed for service, and provide ample working space inside the tank. Custom configured elements evenly distribute heat by direct contact in numerous applications, including acid and alkali solutions. Many models in stock.
Media Library
LEGACY - SSE & SSEM 1-11/16" Wide 2 Terminals, 1 End Strip Heaters [Technical Overview]
LEGACY - Specification for SSE & SSEM. Strip heaters are used for heat transfer by conduction or convection to heat liquids, air, gases and surfaces. Seamless strip elements are supplied without mounting tabs as standard.
Media Library
RCK-1 Roof Cable Clips [Installation Manual]
Installation instructions for RCK-1 Roof Cable Clips for self-regulating CPR heating cables. The RCK-1 Roof Cable Clip is used to attach Chromalox heating Cable to most types of roof surfaces. This kit contains five (5) double slips, which is enough for approximately seven linear feet of roof edge.
Media Library
3204 1/32 DIN Autotune Temperature Controller [Installation Manual]
Installation Instructions for 3204 1/32 DIN Autotune Temperature Controller. The 3204 control provides full auto-tuning PID control in a compact 1/32 DIN package, making it an excellent choice where panel space is a premium.
Media Library
Pick & Ship Power Control Assembly [Technical Overview]
Specifications for Pick & Ship Power Control Assembly. Pick and Ship Power Control Assembly (CPCA) are specifically designed to provide proper power and temperature control in a cost effective and quick ship package.
Media Library
Industrial Heat Trace Systems [Engineering Specifications]
This specification covers the requirements for materials and support services for electric heat-tracing systems supplied by the vendor. Neither the supply of the materials related to the connection of the power supply, nor the installation of the entire system is part of this specification.