FPASM 277 VAC WeatherTrace™ Freeze Protection Heat Trace Panels [Technical Overview]
Specification for FPASM 277 VAC WeatherTrace™ freeze protection heat trace panels. The FPASM WeatherTrace™ with the Sentinel System, continually monitors the supply voltage to each individual heat trace circuit. Loss of voltage or a ground fault condition will trigger an automatic alarm condition, alerting plant personnel of critical process problems and reducing downtime. An annunciator panel then identifies the faulted zone and a Common Alarm is activated with the re-ring feature.*
Media Library
CLS-A Hot Oil System [Technical Overview]
Specification for CLS hot oil system. Chromalox CLS hot oil heat transfer systems are engineered to operate up to 750°F at a pressure of 200 psig. They are used with Syltherm® 800 and other high temperature heat transfer fluids1 which require heated lines to prevent crystallization of the media and pressurization to operate at temperature.
Media Library
HSN, HSW & RHSW Half & Full Sheath Ring Heaters [Technical Overview]
Specifications for HSN, HSW and RHSW half and full sheath ring heaters. Chromalox High Density Ring Heaters are manufactured using the same construction as our high density strip heater. Chromalox Ring Heaters are available in diameters ranging from 2 1/2" to 11" with inside diameters from 1/2" to 8 1/2". Ring Heaters have temperature ratings up to 1200°F (650°C). Ring Heaters have a wide variety of surface heating applications.
Media Library
Modmux Modules [Technical Overview]
Specification for Modmux modules. Modmux modules consist of stand-alone temperature modules connected together on a RS485 two wire multidrop network using the Modbus Protocol. Temperature modules available are 6 channel RTD or 8 channel Thermocouple. Using ChromaSoft SpecView Software, Modmux module data can be logged or trended along with data from other Chromalox Controllers. The data can be used for simple and complex strategies that incorporate data acquisition, alarm management, process monitoring, or profiling temperature variations. Modmux modules are simple to install on a standard 11 pin DIN rail mount relay base. Setup is easy with easy to access terminals and dip switches for the address and baud rate.
Media Library
Heat Trace Control & Panel Selection Guide [Technical Overview]
Specification for heat trace control and panel selection. Whether you are controlling 1 circuit or 10,000, Chromalox offers best in class engineered solutions for industrial and commercial applications in ordinary or hazardous locations. Choose from industry leading thermostats, controllers, distribution systems or our powerful Supervisory Control Software to solve your most demanding Heat Trace application needs.
Media Library
TMW-2 Small Tank Applications [Technical Overview]
Specification for TMW-2 Small Tank Applications. Screw Plug Immersion heaters consist of hairpin bent tubular elements brazed or welded into a screw plug, and provided with terminal enclosures for electrical connections. Chromalox TMW-2 industrial heaters use direct immersion for energy efficiency, and are well suited for clean water and small tank applications.
Media Library
CCAS-8 Architectural Slope Top Convection Heater [Technical Overview]
Specification for CCAS-8 architectural slope top convection heater. Full length thermal protection. CCAS-8 architectural slope top convection heater floating element suspension minimizes expansion Noise. Built-in Wireway for Continuous Installation. Optional Built-in Tamperproof Thermostat or Adjustable Thermostat Controls may be mounted in either the left or right hand terminal box. Built-in low voltage relays, if specified, are located in the right hand terminal box. Power connection can be made at either end of the heater.
Media Library
MWS Water & Water / Glycol System [Technical Overview]
Specification for MWS water and water/glycol system. Chromalox MWS - Mid-Size Water/Glycol System - is engineered to operate to 300˚F (150˚C) with either water or water/glycol fluids. Its electric heating core assures responsive and precise temperature control in a space saving package. The system is suitable for a large range of heating needs with a compact design. The MWS operates in a closed loop system using a cold expansion tank (optional).
Media Library
MWSS Water & Water / Glycol System [Technical Overview]
Specification for MWSS water and water/glycol system. Chromalox MWSS offers internal stainless steel construction and is engineered to operate at 300˚F (150˚C). The MWSS Series is designed for high purity applications like deionized, demineralized or distilled water. The stainless steel construction provides superior corrosion protection. Its electric heating core assures responsive and precise temperature control in a space saving package. The system is suitable for a large range of heating needs with a compact design. The MWSS operates in a closed loop system using a cold expansion tank (optional).
Media Library
LEGACY - NSA 1/2" Wide & SSNHM 1-1/8" Wide Strip Heaters [Technical Overview]
LEGACY - Specification for NSA and SSNHM strip heaters. Chromalox High Density Strip Heaters are constructed using our own proprietary refractory cement and are highly compacted for excellent heat transfer. These are primarily used for convection type air heating and clamp on conductive heating. The strip heaters are available in a wide variety of widths and lengths. There are many different options for sheath material, terminations, mounting and electrical ratings. Depending upon sheath materials the compacted strip can obtain temperatures up to 1500°F (815°C). These heaters are highly suited for many industrial and commercial applications. Strip heaters are used for heat transfer by conduction or convection to heat liquids, air, gases and surfaces. One-piece strip heaters are supplied without mounting tabs as standard.