Vari-Watt Power Controller [PDS]
PDS for Vari-Watt Power Controller. The Chromalox Vari-Watt Controller accepts an analog control signal input and produces a proportional output signal to drive Solid State Relays such as the Chromalox SSR series. Demand Oriented Transfer (DOT) fi ring for each SSR provides precise control with resolution to 3 cycles (select 50 or 60 Hz operation). In a typical application the Vari-watt is used to convert temperature/ process control signal (4-20 mA) to a Zero Crossing SSR power control. When using multiple SSR’s the Load Management feature automatically offsets the turn-on signal for each SSR output to limit inrush current.
Media Library
Monotubular Sheathed Elements [Technical Overview]
Accessories Specifications for Monotubular Sheathed Elements - Monotubular heaters, Double insulation heaters for radiator, Double insulation heaters for towel dryers, Electronic operating and control box for CMC heaters.
Media Library
Heating Mats for Aircraft Infrared Thermography [Technical Overview]
Accessories Specifications for Heating Mats for Aircraft Infrared Thermography - Aircraft infrared thermography heating mats, Aircraft infrared thermography control case, Aircraft infrared thermography transformer.
Media Library
Floor Heating in Industrial Buildings [Technical Overview]
Accessories Specifications for Floor Heating in Industrial Buildings - Ground or industrial floor heating cables, Ground or industrial floor heating cables, Control for base storage heating in industrial building, Control for clearing on external access ways, parking ramps, foot bridges, aerodrome or heliport airstrips, etc.., Control for freeze protection of floors in cold rooms.
Media Library
Air Duct Heaters (Hazardous Areas) [Technical Overview]
Accessories Specifications for Air Duct Heaters in hazardous areas - Air Duct Heaters for hazardous air in hazardous areas. ATEX certified EEx air duct heaters FP-AH, EX-AH, BAT-EX.
Media Library
C1ZF Series Single Phase Solid State Relays [Installation Manual]
Installation instructions for C1ZF Series. The C1ZF Series of solid state relays are an ideal, low cost power control solution for switching resistive loads found applications in such as furnaces, ovens, heat treating, injection molding, thermoforming, press platens, commercial food equipment, semiconductor, lighting and drying, just to name a few.
Media Library
RG-EK-1 Roof & Gutter Cable End Seal Kit [Installation Manual]
Installation Instructions for RG-EK-1. The RG-EK-1 kit is used to terminate self-regulating cables in ordinary locations. Consult factory for installation in hazardous locations. Check the kit label to ensure you have the proper kit for the cable you are installing.
Media Library
Legacy - 1040 BUS Communications Module [Quick Start Installation Manual]
Installation instructions for 1040 - BUS Communications Module. The Chromalox 1040 System - comprising one or more Bus Module each with up to eight Loop Modules - is designed for installation in an enclosure which is sealed against the ingress of dust and moisture. The enclosure must contain sufficient length of 1.3” (35mm) Top-Hat DIN mounting rail to accommodate the system modules (see below) plus an extra 1.97” (50mm) of rail to permit modules to be separated for removal/replacement.
Media Library
Legacy - HTAS & HTLS IntelliTrace [Installation Manual]
Installation Instructions for HTAS/HTLS Series 8000/12000/24000. IntelliTrace provides users with an easy-to-use touchscreen interface. The Chromalox HTLS series panels are microprocessor based temperature control and monitoring units for heat tracing used in freeze protection and process temperature control applications. This series of panels can be confi gured for ambient or line sensing control. The HTLS series implement ascaleable design such that they can be configured with or without communications, ground fault monitoring or enclosure heater. HTAS – Ambient Sensing or Line Sensing Controllers and HTLS – Line Sensing Includes Independent On/Off Control for Each Loop With Adjustable Deadband and Open Sensor Alarm with Programmable Output.
Media Library
JB-C-100 Heating Cable Conduit Connection to a Junction Box [Installation Manual]
Installation instructions for the JB-C-100 Heating Cable Conduit Connection to a Junction Box for Pipe Heating, Roof and Gutter De-Icing and Frost Heave Prevention Applications. The Chromalox JB-C-100 is a NEMA 4X-rated fitting kit used to transition heating cables into a junction box when making connections off of a pipe, tank or roof. It may be used for power, splice, or tee connections. The kit does not include the junction box, flexible tubing/ conduit, or FT-3 Fiberglass tape, which are required to make a complete connection.