SLL Series Long Line Cable

SLL Series Long Line Cable
  • 16, 14, 12, 10 AWG Buss Wire
  • Circuit Lengths up to 7,500 Feet (2,286m)
  • Minimum Install Temperature -40°F (-40°C)
  • Maximum Continuous Exposure Temperature, Power Off, 450°F (232°C)
  • Industrial Process Maintenance Applications
  • Industrial Freeze Protection Applications
  • Steam Cleanable on Process Equipment Up to 300 PSIG
  • 120 - 600 Volt From Stock
  • Approximate Size 3/8 in. W x 1/8 in. H
  • For Use on Metallic Pipes Only
  • See Catalog Page PDF for more information
  • Outputs up to 12 W/Ft.

Chromalox SLL Series Long Line cable provides safe, reliable heat tracing for process temperature maintenance and freeze protection of pipes, valves, tanks and similar applications. Constructed of industrial grade 16, 14, 12 or 10 AWG buss wire with metal braid and fluropolymer overjacketing, SLL ensures operating integrity in most hostile industrial environments. The 450°F (232°C) maximum exposure temperature rating allows steam cleaning of process equipment with up to 300 psig steam.

WARNING — A ground fault protection device is required by NEC to minimize the danger of fire if the heating cable is damaged or improperly installed. A minimum trip level of 30mA is recommended to minimize nuisance tripping.

  • Exceeds limitations of parallel resistance cables.
  • Field splices can be performed easily in minutes with no scrap or wasted cold sections.
  • With lower installed cost than steam tracing, SLL features less maintenance expense and downtime.
  • Chromalox termination, splice, tee and end seal kits reduce installation time.

Can't find what you're looking for?