Commercial Freeze Protection Controller

Chroma-FP-OD
Commercial Freeze Protection Controller
  • Automatic Control for Heat Tracing and Freeze Protection
  • NEMA 4X Outdoor Rated to -40˚F
  • Integrated Electronic Controller with Backlit LCD Display
  • Adjustable Temperature Setpoint 45˚F to -7˚F
  • User Friendly Interface
  • Multiple Sensors Input – Optional
  • Up to 4 Temperature/Moisture Sensors
  • Output Relay 30A @ 120/208/240 VAC
  • 30mA Fixed, Integral Ground Fault Circuit Breaker
  • Adjustable Hold-On Time Delay Range: 0-99 Hours
  • Three Modes of Operation
       • Automatic
       • Manual (ON/OFF)
       • Commissioning
  • Includes 30ft Thermistor
  • Technician Test/Commissioning Mode for Easy and Fast System Testing year Round
  • cULus Rated
  • ETL Certification (US and Canada)
  • ROHS Compliant

The Chroma-FP series of controls is a "Plug and Play" controller for freeze protection applications. When the temperature drops below the adjustable set-point, it activates the contactor energizing the heating elements.

The Technician mode allows installers or technicians to adjust the parameters for customized installations using the electronic controller installed in the front panel. The adjustable Hold-On timer, keeps the outputs to the heaters active to ensure complete freeze protection.

The Hold-On (Time delay) is adjustable in the from 0 to 99 hours. The Chroma-FP Built-in Ground Fault interrupter allows manual reset from the front panel. Three LEDs visible through the transparent plastic cover provides information about the status of the system.

Chroma-FP Models

  • Chroma-FP1-OD – Power box with 1 contactor (30A) & 120V output to heaters
  • Chroma-FP2-OD – Power box with 1 contactor (30A) & 208/240V output to heaters

Select Parameters
Volts
Clear Parameters
Select a Part
Part # Description  
515119 Chroma-FP1-OD Buy Now
515127 Chroma-FP2-OD Buy Now
Can't find what you're looking for?